Category 5 hurricane and HVHZ/Impact ratings are available with our hurricane-tested construction. Extensive laboratory testing that covers even the most stringent areas of the United States, including Miami-Dade and Broward counties in Florida.
No unattractive or labor intense hurricane shutters required to retain design pressure ratings. Impact operable and fixed door units available up to 4′ x 10′ and fixed window units up to 34 square feet.
By testing a myriad of components, construction methods, and configurations, our hurricane-rated products are also completely customizable and built on a per order basis to your exact specifications.
View Hurricane Product Approvals on our Documentation Page
Signature Door Inc. product approvals for hurricane certification can be viewed on our “Documentation” page. Documentation is provided with every hurricane-rated product, so that you can be confident you are complying with hurricane building codes.
• 2 doors on the left and 0 on the right
• 0 doors on the left and 2 on the right
Three Door – Exterior Access
• 3 doors on the left and 0 on the right
• 0 doors on the left and 3 on the right
Three Door – Exterior Access
• 2 doors on the left and 1 on the right
• 1 door on the left and 2 on the right
Bi-Folding Track Hardware
Door slab dimensions up to 43” x 157”
Up to (8) door slabs seated per track
(2) tracks can be brought together for an overall unit width of 52’ divided among (16) door slabs
Each door hangs on a carrier (attached to the top hinge) which houses a minimum of (5) stainless steel bearings, guaranteeing against dirt/debris in the sill track affecting the performance of the carrier
Every other door slab has (4) weather-strip kerfs – (1) at each corner – effectively resisting air infiltration to a level up to (50) times better than a sliding door when used with a bumper sill.
Whether blinds-between-glass, decorative glass or raised panels are used, this hardware allows any glass or panel design, and any stile-and-rail configuration with recessed or mission moldings
Vertical and Lateral adjustments can be made simply using a screwdriver