Incorporate an indoor/outdoor living area into your home with a bifolding system. Easily open to enjoy nature’s beauty, and shut tightly to seal when weather does not permit.
Incorporate an indoor/outdoor living area into your home with a bifolding system. Easily open to enjoy nature’s beauty, and shut tightly to seal when weather does not permit.
Durable hardware allows for smooth, finger-tip operation for years to come. Quality doors combined with quality hardware.
Multiple finish tones are available for desired hardware color coordination.
Combine with an array of locking mechanisms – multipoint, mortise, tubular, and more.
Available with a threshold for exterior applications or a floor channel only for interior room divider applications.
I go to nature every day for inspiration in the day's work.
- Frank Lloyd Wright
Up to sixteen (16) door slabs available in a myriad of configurations. Unequal slab configurations allow for a single swinging door to be utilized when bifolding is not desired.
Let the sunlight in with full glass doors, or allow for optional privacy with full paneled doors. Much of the door design and glass capabilities you've come to expect from Signature Door Inc. are available in a bifolding door system.
Retractable screen system available up to 24' wide x 10' high. Tough polyester screen mesh is hard-wearing and resistant to damage from pets and children. Should the screen become disconnected from the top or bottom channels, the mesh will self-feed back into the channels as it is rolled away and reopened (see video below).
Configuration flexibility allows for a wide range of applications.
• 2 doors on the left and 0 on the right
• 0 doors on the left and 2 on the right
Three Door – Exterior Access
• 3 doors on the left and 0 on the right
• 0 doors on the left and 3 on the right
Three Door – Exterior Access
• 2 doors on the left and 1 on the right
• 1 door on the left and 2 on the right
Bi-Folding Track Hardware
Door slab dimensions up to 43” x 157”
Up to (8) door slabs seated per track
(2) tracks can be brought together for an overall unit width of 52’ divided among (16) door slabs
Each door hangs on a carrier (attached to the top hinge) which houses a minimum of (5) stainless steel bearings, guaranteeing against dirt/debris in the sill track affecting the performance of the carrier
Every other door slab has (4) weather-strip kerfs – (1) at each corner – effectively resisting air infiltration to a level up to (50) times better than a sliding door when used with a bumper sill.
Whether blinds-between-glass, decorative glass or raised panels are used, this hardware allows any glass or panel design, and any stile-and-rail configuration with recessed or mission moldings
Vertical and Lateral adjustments can be made simply using a screwdriver